If you’ve had a quote for pool edging, there’s a good chance the word “formwork” came up and nobody stopped to explain it. You nodded, moved onto the price and never really found out what its purpose is in shaping your pool edge.
That gap matters. Homeowners who sign off on formwork without understanding it are the ones who end up with the bad installs: edges that crack in year two, joins that catch a toe, a ‘seamless’ edge that isn’t. The installer who can’t explain what their formwork does is usually the installer cutting corners on it.
By the end of this article, you’ll know what formwork is, what its purpose is and what separates a proper job from one that’s been overlooked or treated as a shortcut.
What Is Pool Formwork & Why It Exists
First, a distinction worth making before you go searching further: this isn’t the formwork used to build a pool’s walls and shell during construction. That’s a different product, for a different stage of a pool’s life. Pool edge formwork, the kind we’re talking about here, shapes the concrete edge around a pool that’s already in the ground, or going in. It works on an existing pool just as well as a new one.
Mechanically, it’s simple. Formwork is custom-cut polystyrene, fitted with a PVC strip along the pool side, cut to your pool’s exact measurements, not a standard size trimmed to fit. PoolEdge installs it around the pool edge or ships it to you as a DIY kit if you’re doing it yourself. Either way, your own concreter pours the concrete directly against it once it’s in place. The formwork holds that shape while the concrete cures. Once it’s done, the formwork comes out, removed by your concreter, and what’s left is a continuous, seamless edge.
It exists because of what it replaced. Bullnose pavers are laid individually, and every piece is a joint. Joints move, let weeds through, lose their sand and eventually need re-pointing. A formed concrete edge has none of that, as it’s one continuous surface rather than separate pieces. We’ve gone through a full comparison of seamless concrete edging versus bullnose pavers, if you want to read all the details on that side of it.
How Formwork Supports Concrete Edges
Your concreter does the actual pour. Formwork’s job during that pour is singular: hold the concrete to an exact line while it’s still wet enough to move. Get that line wrong, even by a few millimetres, and you end up with lips, gaps, or an edge that drifts out of true where two sections meet. Once concrete sets, there’s no fixing that without cutting it out and starting again.
The PVC strip itself depends on the pool type. Fibreglass pools use a plumb strip, fixed directly to the pool’s edge. Fibreglass shells aren’t always perfectly straight along that edge, so once the foam formwork is in place, it gets checked against a chalk mark and trimmed back wherever it bows, before the visible PVC face piece goes on. Skip that step and the bow shows up in the finished edge, not just the shell underneath it.
Concrete pools use a tile strip instead, and it only goes on once the pool’s own edge has already been tiled, grouted and screeded flush. The tile strip has a specific orientation, and corners need to be cut and bent to follow the pool’s exact shape rather than fitted as a straight run. Get that sequencing wrong, tile strip on before the edge is properly prepped, or fitted the wrong way around, and the formwork won’t hold its line. The PVC plumb or tile strip remain on the pool once the formwork has been removed, giving a neat and finished edge under the concrete.
This is also where “cut to your pool’s exact measurements” earns its keep. A generic form, trimmed on site to roughly fit, leaves small inconsistencies in the line. Those inconsistencies don’t show up on install day. They show up two or three years later, as the first places the edge starts to move.
The Role of Formwork In Long Term Durability
The join between the coping and the pool deck is where most real-world problems start. Water finds that join before it finds anywhere else, and once it’s in, it works on whatever’s underneath, slowly, over months and years, not overnight.
Two things actually cause that: ordinary wear from UV and pool chemicals breaking down lower-grade materials over time, and a concrete edge that was never given room to move. Concrete expands and contracts with temperature, and PoolEdge kits build in a bond breaker strip between the tile strip and the pour specifically to absorb that movement. Without it, expansion and contraction works directly against the tile and the pool’s bond beam underneath, and that’s where cracking starts. Formwork’s role in preventing this is upstream of both problems. A precisely formed edge, correctly separated at the bond breaker, pours as one continuous surface with nowhere for that stress to transfer, so there’s no weak seam for water to find on day one.
It also matters that PoolEdge formwork is single-use and removed after the pour, only leaving behind the stainless steel ties within the concrete. Some cheaper builds leave formwork material in place permanently, buried inside the finished edge. That’s a shortcut, not a feature, and it’s exactly the kind of leftover weak point that shows up as a crack line a few years down the road.
Who Actually Needs to Think About This
If you’re a Perth homeowner looking at ageing bullnose pavers and wondering what replacing them actually involves, this is the part of the job that determines whether the new edge outlasts the old one. It’s worth asking any installer you’re comparing how they form the edge, not just what the finished product looks like.
If you’re outside Perth, or you’d rather install it yourself, the same formwork is available as a kit, cut to your measurements and freighted anywhere in Australia or New Zealand. Custom pool shapes, whether that’s a circular plunge pool or something less standard, use the same principle with more cutting precision, covered in more detail in our guide to formwork for custom-shaped pools. If anything here raises a question specific to your pool, get in touch with our team.
Conclusion
Formwork isn’t decoration and it isn’t an installation detail you can skip past to get to the finish. It’s the thing that determines whether your pool edge is one continuous, sealed surface or a series of small weaknesses waiting to show up later. Precision during the pour is what you’re actually paying for.
A few things worth carrying away from this:
- PoolEdge formwork is cut to your pool’s exact measurements, not trimmed from a generic size
- Fibreglass and concrete pools need different strip types, plumb versus tile and each has its own prep step that has to happen before it goes on
- A bond breaker strip, not the formwork material alone, is what actually absorbs concrete’s movement
- Single-use formwork that’s fully removed avoids leaving a weak point buried in the finished edge
If you’re in Perth, see how our supply and install process works. If you’re installing interstate or in New Zealand, browse the DIY PoolEdge formwork kits.